AMETEK Programmable Power
Programmable Power Products
Elgar, Sorensen and California Instruments Products
Products | Support | Contact | News
Sales Worldwide
DC Products Bench Products AC Products Modular AC/DC Electronic Loads Custom Solutions
Overview Features Specifications Technical Diagrams Downloads Get a Quote
Sorensen XG 1700 Series : Specifications
Model Output Voltage1 Output Current2 Output Power3
XG 6-220 6 V 220 A 1330 W
XG 8-200 8 V 200 A 1610 W
XG 12-140 12 V 140 A 1690 W
XG 20-84 20 V 84 A 1690 W
XG 33-50 33 V 50 A 1660 W
XG 40-42 40 V 42 A 1690 W
XG 60-28 60 V 28 A 1690 W
XG 80-21 80 V 21 A 1690 W
XG 100-17 100 V 17 A 1710 W
XG 150-11.2 150 V 11.2 A 1690 W
XG 300-5.6 300 V 5.6 A 1690 W
XG 600-2.8 600 V 2.8 A 1690 W
Line Regulation Voltage (0.005% of rated output voltage +2 mV)4 Current (0.01% of rated output current +2 mA)5
XG 6-220 2.3 mV 24 mA
XG 8-200 2.4 mV 22 mA
XG 12-140 2.6 mV 16 mA
XG 20-84 3.0 mV 10.4 mA
XG 33-50 3.7 mV 7 mA
XG 40-42 4 mV 6.2 mA
XG 60-28 5 mV 4.8 mA
XG 80-21 6 mV 4.1 mA
XG 100-17 7 mV 3.7 mA
XG 150-11.2 9.5 mV 3.12 mA
XG 300-5.6 17 mV 2.56 mA
XG 600-2.8 32 mV 2.28 mA
Load Regulation Voltage (0.005% of rated output voltage + 2 mV) 6 Current (0.02% of rated output current +5 mA) 7
XG 6-220 2.3 mV 49 mA
XG 8-200 2.4 mV 45 mA
XG 12-140 2.6 mV 33 mA
XG 20-84 3.0 mV 22 mA
XG 33-50 3.7 mV 15 mA
XG 40-42 4 mV 13 mA
XG 60-28 5 mV 10.6 mA
XG 80-21 6 mV 9.21 mA
XG 100-17 7 mV 8.4 mA
XG 150-11.2 9.5 mV 7.2 mA
XG 300-5.6 17 mV 6.1 mA
XG 600-2.8 32 mV 5.6 mA
Model Output Noise (rms, 300 kHz) Output Ripple
(p-p, 20 MHz)
  Voltage Current 8 Voltage
XG 6-220 8 mV 400 mA 50 mV
XG 8-200 8 mV 340 mA 50 mV
XG 12-140 8 mV 240 mA 50 mV
XG 20-84 8 mV 150 mA 50 mV
XG 33-50 8 mV 120 mA 50 mV
XG 40-42 8 mV 90 mA 50 mV
XG 60-28 8 mV 75 mA 50 mV
XG 80-21 8 mV 50 mA 80 mV
XG 100-17 8 mV 40 mA 80 mV
XG 150-11.2 10 mV 32 mA 100 mV
XG 300-5.6 25 mV 20 mA 150 mV
XG 600-2.8 50 mV 12 mA 250 mV
1. Maximum output voltage is guaranteed to be 0.1% of the rated voltage at zero output setting, using the front panel or digital remote programming modes.
2. Maximum output current is guaranteed to be 0.2% of the rated current at zero output setting, using the front panel or digital remote programming modes, and when measured with rated load resistance.
3. Total output power is also based on AUX1 Output Voltage (5 V) and AUX1 Output Current (0.5 A) and AUX2 Output Voltage (15 V) and AUX2 Output Current (0.5 A).
4. From 85–132 Vac or 170–265 Vac, constant load.
5. From 85–132 Vac or 170–265 Vac, constant load.
6. From no load to full load, constant input voltage.
7. For load voltage change, equal to the unit voltage rating, constant input voltage.
8. For 6 V models the current ripple is measured at 2–6 V output voltage and full output current. For all other models, the current ripple is measured at 10–100% output voltage and full output current.
New Expanded AC Product Line Featuring California Instruments
   
Product Configurator
DC Electronic Loads
DC Modular Supply
Discontinued Products
Product Support
Contact Sales

Model Maximum Recommended Remote Sense Line Drop Compensation per Line 9 Up-prog. Response Time, 0~Vmax 10 Efficiency
(100/200 VAC input) 11
XG 6-220 1 V 60 ms
 76/78%
XG 8-200 1 V 60 ms
 77/79%
XG 12-140 1 V 60 ms 81/84%
XG 20-84 1.5 V 60 ms 82/85%
XG 33-50 2 V 60 ms
 83/86%
XG 40-42 2 V 60 ms
 83/87%
XG 60-28 3 V 60 ms
 84/88%
XG 80-21 5 V 100 ms
 84/88%
XG 100-17 5 V 100 ms
 84/88%
XG 150-11.2 5 V 100 ms 84/88%
XG 300-5.6 5 V 150 ms 84/88%
XG 600-2.8 5 V 250 ms 84/88%
Model Down-prog. Response Time: Full Load Down-prog. Response Time: No Load Over-Voltage Trip Point
XG 6-220 50 ms 300 ms 0.5–7.5 V
XG 8-200 50 ms 400 ms 0.5–10 V
XG 12-140 50 ms 500 ms 1–15 V
XG 20-84 50 ms 600 ms 1–24 V
XG 33-50 50 ms 700 ms 2–39 V
XG 40-42 50 ms 800 ms 2–44 V
XG 60-28 50 ms 900 ms 3–66 V
XG 80-21 80 ms 1000 ms 3–95 V
XG 100-17 100 ms 1200 ms 3–125 V
XG 150-11.2 150 ms 1800 ms 3–180 V
XG 300-5.6 150 ms 2200 ms 5–330 V
XG 600-2.8 250 ms 3500 ms 5–660 V
9. When using remote sense, the total of the load voltage and the load line drops must not exceed the rated output of the power supply. For example, for an XG 6-220 in an application with 1 V of load line loss (0.5 V/Line), the maximum available load voltage would be 6-1=5 V. Note: The unit may operate at higher output voltages than this, but there is no guarantee That the power supply will meet performance specifications. Ultimately, the upper limit of the output voltage will be determined by internal circuitry of the power supply (non-adjustable)
10. With rated, resistive load.
11. At 100/200 Vac input voltage and maximum output power.
Applies to all footnotes: Programming and Readback: RS-232, RS-485, USB built in. GP1B, Ethernet optional. Specifications are guaranteed from 1% to 100% of the rated output voltage, current, and power.
* Typical
Note: All specifications are subject to change.
AC Line Input Specifications
Rated AC Input Voltage/Frequency
 100–240 Vac, 47–63 Hz
Operational AC Input Voltage/Frequency 85–265 Vac continuous, 47–63 Hz, single phase
Input Current (at 100/200 Vac) 23/12 A
Inrush Current (100/200 Vac) Less than: 50 A
Power Factor Correction 0.99@100/200 Vac, rated output power
Programming Mode APG ISOL Digital
Voltage & Current Output
Voltage Programming		 0-100% 2~up to 10 V, programmable    
Voltage & Current Output
Resistive Programming		 0-100% 2~up to 10 kΩ, programmable    
Voltage Output Resistor Programming 0-100% 2~up to 10 kΩ, programmable    
Output Voltage and Current Monitor 0-100% 2~up to 10 V, programmable    
Voltage Programming Accuracy (mV)1 ± 0.5% of rated output voltage, max (0-4V/4K range)   ± 0.1% of rated output voltage
Current Programming Accuracy (mV)1 ± 1% of rated output current,
max (0-4V/4K range)		   ± 0.2% of rated output current
Voltage Readback Accuracy (mV) ± 1% of rated output voltage   ± 0.1% of rated output voltage
Current Readback Accuracy (mV) ± 1% of rated output current   ± 0.2% of rated output current
Isolation (Prog and Readback Lines) With respect to chassis potential: 500 V With respect to:
chassis potential: 600 V
negative or positive main output 1500 V
negative or positive auxiliary output 300 V		  
Voltage and Current
Programming Resolution		     0.012% of full scale
Voltage and Current
Readback Resolution		      
Parallel Operation Up to 4 units in master / slave Up to 4 units in master / slave Up to 4 units in master / slave
Series Operation   Up to 2 units (with external diodes) Up to 2 units (with external diodes)
Constant Voltage (CV) Constant
Current (CC) Indicator		 CV: TTL High (4-5 V)
CC TTL Low (0-0.6 V)		    
Shutdown Control 2   Logic low 0.0 - 1.4 V
Logic high 2.0 - 15 V
Dry contact compatible		  
AUX On/Off Control   TTL level or dry contact compatible  
Power Supply Status Signal   TTL high: OK (4-5 V)
TTL low: fail (0-0.6 V)		  
Interlock Enable/Disable   Dry contact. Open/Short: On or
Off programmable		  
1. Typical APG or isolated APG accuracy can be improved to max accuracy by user calibration at the specific range selected
2. The shutdown input has user selectable negative logic operation via front panel or remote digital input/output
Note: All specifications are subject to change.
Output Performance Specifications
Temperature Coefficient 100 PPM/° C from rated output voltage, after a 30-minute warm-up*
Drift (8 hours) 0.05% of rated output voltage & current over an 8 hour interval with constant line, load & temperature, after a 30-minute warm-up
Hold-up Time Typical 20 ms at any rated input line.
Transient Response Time 1 Less than 1 ms for 6 V to 60 V models. Less than 2 ms for 80 V to 600 V models*
Meter Accuracy 0.5% ± 1 count
Isolation
AC Input to Output
AC Input to Chassis		 1350 Vac
1350 Vac
Environmental Specifications (Indoor use)
Operating Temperature Range
 32°F to 122°F, 100% load (0°C to 50°C)
Storage Temperature Range
 -4°F to 158°F (–20° C to 70°C)
Operating Humidity Range
 30–90% RH (no condensation)
Storage Humidity Range
 10–95% RH (no condensation)
Operating Altitude
 Up to 6,500 feet (2,000 m)
Installation Category
 II (IEC 1010-1)
Pollution Degree 2 (IEC 1010-1)
Mechanical Specifications
XG 1700 Watt (W×H×D)
 16.8 x 1.7 x 19.0 inch (429 x 43.6 x 483 mm without rack mount ears)
Weight 22 lb (10 kg)
Cooling Forced air cooling by internal fans
Regulatory Approvals
Safety
 CSA 22.2 No. 61010-1 and UL61010-1. Marked with cCSAus, CE EN61010-1
EMC
 Complies with EN61326-1
Complies with EN55022, Class A, FCC Part 15A for conducted emissions
Complies with EN55022, Class A, FCC Part 15A for radiated emissions
Complies with EN61000-4 series of standards for immunity
9. When using remote sense, the total of the load voltage and the load line drops must not exceed the rated output of the power supply. For example, for an XG 6-110 in an application with 1 V of load line loss (0.5 V/Line), the maximum available load voltage would be 6–1= 5 V. Note: The unit may operate at higher output voltages than this, but there is no guarantee that the power supply will meet performance specifications. Ultimately, the upper limit of the output voltage will be determined by internal circuitry of the power supply (non-adjustable.)
10. With rated, resistive load.
11. At maximum output power.
Copyright © 2009 AMETEK Inc. Privacy Phone: 858-450-0085