AMETEK Programmable Power : Sorensen : XT Series : Specifications

Programmable Power Products

Elgar, Sorensen and California Instruments Products

Sorensen : XT Series : Specifications

Output : Voltage and Current

Model	Output Voltage	Output Current	Output Power
XT 7-6	0-7 V	0-6 A	42 W
XT 15-4	0-15 V	0-4 A	60 W
XT 20-3	0-20 V	0-3 A	60 W
XT 30-2	0-30 V	0-2 A	60 W
XT 60-1	0-60 V	0-1 A	60 W
XT 120-0.5	0-120 V	0-0.5 A	60 W
XT 250-0.25	0-250 V	0-0.25 A	60 W

Model	Line Regulation² Voltage	Line Regulation² Current	Load Regulation³ Voltage	Load Regulation³ Current
XT 7-6	2 mV	0.4 mA	2 mV	0.4 mA
XT 15-4	2 mV	0.4 mA	2 mV	0.4 mA
XT 20-3	2 mV	0.4 mA	2 mV	0.4 mA
XT 30-2	2 mV	0.3 mA	2 mV	0.3 mA
XT 60-1	2 mV	0.3 mA	2 mV	0.3 mA
XT 120-0.5	2 mV	0.3 mA	2 mV	0.3 mA
XT 250-0.25	3 mV	0.25 mA	3 mV	0.25 mA

Model	Output Noise & Ripple (20 Hz – 20 MHz) Voltage	Output Noise & Ripple (20 Hz – 20 MHz) Current	Meter Accuracy Voltage (1% of Vmax + 1 count)	Meter Accuracy Current (1% of Vmax + 1 count)
XT 7-6	< 1 mVrms	< 1 mArms	0.08 V	0.07 A
XT 15-4	< 1 mVrms	< 1 mArms	0.25 V	0.05 A
XT 20-3	< 1 mVrms	< 1 mArms	0.3 V	0.04 A
XT 30-2	< 1 mVrms	< 1 mArms	0.4 V	0.03 A
XT 60-1	< 1 mVrms	< 1 mArms	0.7 V	0.02 A
XT 120-0.5	< 1 mVrms	< 1 mArms	2.2 V	0.006 A
XT 250-0.25	< 1 mVrms	< 1 mArms	3.5 V	0.003 A

Model	Drift (8 hours)[4] Voltage (0.02% of Vmax)	Drift (8 hours)[4] Current (0.03% of Imax)	Temperature Coefficient[5] Voltage (0.015% of Vmax/°C)	Temperature Coefficient[5] Current (0.02% of Imax/°C)
XT 7-6	1.4 mV	1.8 mA	1.05 mV	1.2 mA
XT 15-4	3 mV	1.2 mA	2.25 mV	0.8 mA
XT 20-3	4 mV	0.9 mA	3 mV	0.6 mA
XT 30-2	6 mV	0.6 mA	4.5 mV	0.4 mA
XT 60-1	12 mV	0.3 mA	9 mV	0.2 mA
XT 120-0.5	24 mV	0.15 mA	18 mV	0.1 mA
XT 250-0.25	50 mV	0.075 mA	37.5 mV	0.05 mA

1. Specifications indicate typical performance at 25° C ± 5°C, nominal line input of 115 Vac.
2. For input voltage variation over the AC input voltage range, with constant rated load.
3. For 0-100% load variation, with constant nominal line voltage.
4. Maximum drift over 8 hours with constant line, load, and temperature, after 30-minute warm-up.
5. Change in output per °C change in ambient temperature, with constant line and load.
6. Apply accuracy specifications according to the following voltage program accuracy example: Set a model 15-4 power supply to 10 V. The expected result will be within the range of 10 V ± 20 mV ± 0.1% of the set voltage of 10 V.

New Expanded AC Product Line Featuring California Instruments

	Product Configurator

	DC Electronic Loads

	DC Modular Supply

	Discontinued Products

	Product Support

	Contact Sales

XT 60 W Internal Interface Specifications with RS232 or GPIB Interface Installed [1,6]

Model	Program Accuracy Voltage (mV)	Program Accuracy Current (mA)	Program Accuracy OVP (mV)
XT 7-6	10 (±0.1%)	110 (±0.15%)	70
XT 15-4	20 (±0.1%)	70 (±0.15%)	150
XT 20-3	20 (±0.1%)	50 (±0.15%)	200
XT 30-2	30 (±0.15%)	40 (±0.15%)	300
XT 60-1	200 (±0.15%)	26 (±0.2%)	200
XT 120-0.5	400 (±0.15%)	13 (±0.2%)	1200
XT 250-0.25	800 (±0.15%)	7 (±0.2%)	2400

Model	Readback Accuracy Voltage (mV)	Readback Accuracy Current (mA)
XT 7-6	10 (±0.15%)	110 (±0.15%)
XT 15-4	10 (±0.15%)	70 (±0.15%)
XT 20-3	10 (±0.15%)	50 (±0.15%)
XT 30-2	15 (±0.15%)	40 (±0.15%)
XT 60-1	35 (±0.15%)	26 (±0.2%)
XT 120-0.5	70 (±0.15%)	13 (±0.2%)
XT 250-0.25	140 (±0.15%)	7 (±0.2%)

Input

Operational AC Input Voltage	Standard: 115 Vac ±10%. 57-63 Hz; Optional: 110/220/230/240 Vac ±10%, 47-63 Hz
AC Input Current	Single Unit: 1.2 A, Dual Unit: 2.4 A, Triple Unit: 3.6 A, Quad Unit: 4.8 A, at 115 Vac

General

Voltage Mode Transient Response Time	< 100 μs recovery to 0.05% band, ±50% load change in the range of 25% to 100% of the rated load
Front Panel Voltage and Current Control	10-turn voltage and 1-turn current potentiometers (10-turn current optional)
Front Panel Voltage Control Resolution	0.02% of maximum voltage
AC Input Connector Type	IEC 320 connector
Approvals	CSA certified to CSA C22.2 No. 107.1. Meets USA EMC standard FCC Part 15B Class A; meets Canadian EMC standard: ICES-001, Class A (Models up to and including 120 V)

Analog Programming (with optional APG interface installed)

Remote On/Off and Interlock	2 to 25 Vdc high. < 0.8 Vdc low. User-selectable.
Remote Analog Programming Option	0-10 Vdc for 0-100% or rated voltage or current ±0.1%, 0-10 kΩ for 0-100% of rated voltage or current ±0.1%
Remote Monitoring	0-10 Vdc for 0-100% of rated voltage or current ±0.1%
Over Voltage Protection Trip Range	3 V to full output +10%
Tracking Accuracy	±1% for series operation

Environmental

Operating Temperature	0 to 30°C for full rated output. Above 30°C, derate output linearly to zero at 70°C
Storage Temperature	- 55 to 85°C
Humidity Range	Up to 80% RH, non-condensing

Physical

Dimensions	Width: 4.2” (109.2 mm) Height: 5.2” (134.7 mm) Depth: 11.7” (297 mm)
Weight	Approximately 7.7 lb (3.5 kg)

Specifications subject to change without notice.