California Instruments MX CTS System : Get a Quote
For specifications on the MX Series AC/DC power sources, refer to the MX
Series data sheet. The MXCTS system requires an MX45-3Pi to function. The
MXCTS system is an option for the MX45-3Pi power source.
Specify MX45 model and one of three system configuration suffixes
-CTSH
High Power Test Standards System includes:
PACS-3-75 Measurement system. Mounted in OMNI-3-75 cabinet.
OMNI-3-75 Three phase Lumped impedance cabinet for IEC 61000-3-11 Flicker
CIC651 CTSMXH Software for IEC 61000-3-12 (Harmonics and IEC 61000-3-11 (Flicker) testing. (P/N CIC651)
CI400PCI A/D Card PCI Bus.
CI68C Cable from CI400PCI to PACS-3-75.
-CTSL
Low Power Test Standards System includes:
PACS-3-75 Measurement system. Mounted in OMNI-3-75 cabinet.
OMNI-3-37MX Three phase Lumped impedance for IEC 61000-3-3
Flicker
CIC652 CTSMXL Software for IEC 61000-3-2 (Harmonics and
IEC 61000-3-3 (Flicker) testing. (P/N CIC652)
CI400PCI A/D Card PCI Bus.
CI68C Cable from CI400PCI to PACS-3-75.
Cabinet 42” cabinet with PACS-3-75 and OMNI-3-37MX installed.
-CTSHL
High and Low Power Test Standards System:
Combines CTSH and CTSL components.
PC Requirements
CPU
Pentium 4, 1.2 GHz clock
or faster.
RAM
256 Mbytes or more.
Hard Disk
20 Gbytes or more.
20 Mbytes required for
program storage.
Display
Color SVGA Monitor
Slots
Available PCI slot for A/D
card.
Software
MS Word, Windows
IEEE-488
For control of the power
source, a National Instruments
IEEE bus controller
and available PC slot or
RS232 port are required.
California Instruments will quote a PC
as part of the system on request. Contact
factory for details.
Relevant MX45 Options:
-411
EN/IEC 61000-4-11
Voltage Dips and Interruptions
test option. (included
with -EOS options)
-413
EN/IEC 61000-4-13
Harmonics and Inter-
Harmonics test option.
-160
RTCA/DO-160 test
firmware.
-704
MIL-STD704 test firmware.
PC Options:
CIC-PC
Suitable Pentium class PC
with preinstalled CTS and
MXGUI software. Includes
Case, keyboard, mouse,
Windows and MS Word.
