AMETEK Programmable Power : Sorensen : HPD Series : Specifications

Programmable Power Products

Elgar, Sorensen and California Instruments Products

Sorensen : XPD Series : Specifications

Output Ratings¹

Model	15-20	30-10	60-5
Output Voltage	0-15 V	0-30 V	0-60 V
Output Current	0-20 A	0-10 A	0-5 V
Output Power	300 W	300 W	300 W

Line Regulation²

Model	15-20	30-10	60-5
Voltage (0.01% of Vmax + 2 mV)	2 mV	2 mV	2 mV
Current (0.01% of Imax + 1 mA)	3 mA	2 mA	1.5 mA

Load Regulation³

Model	15-20	30-10	60-5
Voltage (0.01% of Vmax + 2 mV)	2 mV	2 mV	2 mV
Current (0.01% of Imax + 5 mA)	3 mA	2 mA	1.5 mA

Meter Accuracy

Model	15-20	30-10	60-5
Voltage (1% of Vmax + 1 count)	0.25 V	0.4 V	0.7 V
Current (1% of Imax + 1 count)	0.3 A	0.2 A	0.06 A

Output Noise & Ripple

Model	15-20	30-10	60-5
Voltage rms	5 mV	5 mV	5 mV
Voltage (p-p) (0-20 MHz)	75 mV	75 mV	100 mV

Drift (8 hours): 4

Model	15-20	30-10	60-5
Voltage (0.02% of Vmax)	3 mV	6 mV	12 mV
Current (0.03% of Imax)	6 mA	3 mA	1.5 mA

Temperature coefficient: 5

Model	15-20	30-10	60-5
Voltage (0.015% of Vmax/° C)	2.25 mV	4.5 mV	9 mV
Current (0.02% of Imax/° C)	4 mA	2 mA	1 mA

Interface Specifications: 1,6

Model	15-20	30-10	60-5
Program Resolution (16-bit)
Voltage	0.25 mV	0.5 mV	1.01 mV
Current	0.34 mA	0.17 mA	0.08 mA
OVP	0.25 mV	0.5 mV	1.01 mV
Program Accuracy
Voltage (0.2% + 10 mV)	60 mV (+/- 0.1%)	70 mV (+/- 0.1%)	90 mV (+/- 0.12%)
Current (0.3% + 10 mA)	75 mA (+/- 0.12%)	50 mA (+/- 0.12%)	25 mA (+/- 0.1%)
OVP (0.5%) + 100 mV)	1500 mV	3000 mV	6000 mV
Readback Resolution (16-bit)
Voltage	0.25 mV	0.5 mV	1.01 mV
Current	0.34 mA	0.17 mV	0.08 mA
Readback Accuracy
Voltage (0.2% + 20 mV)	45 mV (+/- 0.3%)	90 mV (+/- 0.3%)	175 mV (+/- 0.3%)
Current (0.3% + 20 mA)	75 mA (+/- 0.12%)	40 mV (+/- 0.12%)	25 mA (+/- 0.1%)

1. Specifications indicate typical performance at 25° C +/- 5° C, nominal line input of 120 VAC.
2. For input voltage variation over the AC input voltage range, with constant rated load.
3. For 0-100% load variation, with constant nominal line voltage.
4. Maximum drift over 8 hours with constant line, load and temperature, after 60 minutes warm-up.
5. Change in output per ° C change in ambient temperature, with constant line and load.
6. Apply accuracy specifications according to the following voltage program accuracy example:
Set a model 15-20 power supply to 10 volts. The expected result will be within the range of
10 volts +/- 60 mV +/- 0.1% of the set voltage of 10 volts.

New Expanded AC Product Line Featuring California Instruments

	Product Configurator

	DC Electronic Loads

	DC Modular Supply

	Discontinued Products

	Product Support

	Contact Sales

General Specifications

Operational AC input voltage	Single unit: 104-127 VAC at 6 Arms; Dual unit: 104-127 VAC at 12 Arms, 47-63 Hz
Switching Frequency	100 kHz (nominal)
Voltage Mode Transient Response Time	<500 µs recovery to 50 mV band for ±50% load change in the range of 25% to 100% of the rated load
Operating Ambient Temperature	0 to 30° C for full rated output. Above 30°C, derate output linearly to zero at 70° C
Storage Temperature Range	-55° C to 85° C
Humidity Range	0 to 80% RH, non-condensing
Front Panel Voltage and Current Control	10-turn voltage and 1-turn current potentiometers (10-turn current optional)
Front Panel Voltage Control Resolution	0.02% of maximum voltage
AC Input Connector Type	IEC 320 connector
Weight (one unit)	Approximately 7.7 lb (3.5 kg)
Dimensions (H x W x D)	5.2 x 4.2 x 11.7” (132 x 109.2 x 297 mm)

Analog Programming

Remote On/Off and Interlock	2-25 VDC high. <0.8 VDC low. User-selectable.
Remote analog Programming Option	0-10 VDC for 0-100% of rated voltage or current ±1.0%, 0-10 kΩ for 0-100% of rated voltage or current ±1.0%
Remote Monitoring	0-10 VDC for 0-100% or rated voltage or current ±1.0%
Over Voltage Protection Trip Range	3 V to full output ±10%
Tracking Accuracy	±1% for series operation

Regulatory Approvals

CE-marked units meet: EN61010-1, EN61000-6-2 and EN61000-6-4; CSA C/US certified to UL61010-1B and CSA C22.2 No 1010.1; Meets USA EMC standard: FCC, part 15B, class A; Meets Canadian EMC standard: ICES-001, Class A.

Specifications subject to change without notice.